FranklinWH battery installers across Greater Adelaide, SA.

Why the installer matters more than the battery

The Clean Energy Regulator inspected 1,278 home battery installations under the Cheaper Home Batteries Program between July 2025 and April 2026 — more than 60% came back substandard and 1.2% unsafe. Solar Select checks installer approval and current eligibility before matching your Adelaide enquiry. Manufacturer accreditation is a separate check; confirm the credentials relevant to your chosen battery.

What specifically goes wrong on a FranklinWH install

• The aGate rewires how the home’s circuits are managed — this is switchboard-level work where installer quality shows up immediately
• Per-circuit backup decisions made lazily at install time are the difference between the system as designed and the system as marketed
• Generator integration needs correct configuration to behave as an orchestrated source rather than a bolt-on
• Clean Energy Council listing is model-by-model — confirm the exact aPower variant quoted

Request my FranklinWH quotes in Adelaide.

Source: CER inspections, reported by UTS (Apr 2026)

Comparing FranklinWH quotes in Adelaide

We don't publish price bands, because installed prices move constantly and depend on your roof, switchboard and supply. What we can tell you is what to hold constant so three quotes are actually comparable — match these first, then compare after-rebate dollars per usable kWh.

1. How many aPower units, and whether the aGate configuration leaves room to add more later
2. Which circuits the aGate controls individually — per-circuit management is the product, so a quote that skips this detail skips the point
3. Whether the design brings in a generator or EV charging now or leaves provision for later
4. What your existing solar inverter is, since the AC-coupled design keeps it — its age and condition still matter
5. Confirmation the exact model is on the Clean Energy Council approved battery list

A cheaper quote that skips backup hardware, assumes an inverter you don't have, or quietly changes the configuration isn't cheaper — it's a different job.

Want three FranklinWH quotes you can actually compare? Your enquiry goes to up to 3 vetted installers in Adelaide, all quoting the same scope.

Battery rebates in South Australia

• Cheaper Home Batteries Program (federal) — roughly a quarter off the installed battery cost, upfront, paid at its full rate on the first tier of usable capacity and at a reduced rate above that. Applied at quote by the installer, not claimed back later.
• Federal-only in 2026 (SA) — South Australia runs federal-only on battery rebates in 2026 — no active state battery program. SA retailers compete hard on battery + VPP plans, and the federal discount applies in full. Full SA rebate breakdown

The Adelaide numbers

Solar Select's Adelaide study-area aggregation of Clean Energy Regulator data includes 348,895 small-scale systems across 154 postcodes — about 2,300 MW of capacity as at 2026-06. For a FranklinWH retrofit in Adelaide, check the existing inverter and switchboard before choosing the configuration. Ask whether the inverter stays, is replaced, or works alongside another one; installation counts do not answer that for your home.

In the typical Greater Adelaide postcode, new systems averaged about 11.2 kW through 2025. That is the scale of array a FranklinWH battery would be charged from here, so ask each installer to size storage against that generation rather than the headline capacity: the configuration that suits a 11.2 kW roof is not automatically the biggest one quoted.

SA Power Networks covers the whole of Greater Adelaide, from Gawler in the north through the Adelaide Hills to the southern suburbs. South Australia runs some of the highest rooftop-solar penetration anywhere, so flexible-export and remote-management rules land here first — worth asking each installer how a FranklinWH behaves when the network winds exports down on a mild spring day.

Adelaide swings from about 7.4 peak sun hours in Jan to 2.1 in Jun — roughly 3.5× more generation in the sunniest month than the dullest. On a 10 kW array that is around 62.9 kWh a day in Jan against 17.8 kWh in Jun. Size a FranklinWH on the winter figure: FranklinWH is 13.6 kWh per unit, stackable, so the real question at quote stage is what it can actually refill on a 17.8 kWh day, not what it holds on paper.

Install counts and capacity: Clean Energy Regulator postcode data for small-scale installations (CC BY).

What owning a FranklinWH is actually like

Spec sheets stop being interesting about a week after install. These are the things owners notice in year one.

• The aGate’s per-circuit control is what owners end up valuing — choosing which circuits ride through an outage and which shed automatically is a level of control most systems simply do not offer.
• Blackout behaviour includes starting itself from stored energy and running indefinitely with solar — genuine off-grid capability rather than a few hours of ride-through.
• Because it is AC-coupled and inverter-agnostic, it lives happily alongside any existing solar brand — your solar system’s app and the FranklinWH app coexist.
• Generator integration is unusually clean: the aGate treats a generator as one more managed source, which rural owners in particular make real use of.

Four questions to ask any FranklinWH quote

1. Which circuits will the aGate control individually, and which stay on in an outage?
2. How many aPower units does my usage actually need, and what does adding one later involve?
3. How many FranklinWH systems have you commissioned, and who handles a manufacturer claim in year four?
4. Can you show me this exact model on the Clean Energy Council approved battery list?

Grid connection in Adelaide

• SA Power Networks pre-approval — battery systems usually need explicit pre-approval before install. A good installer lodges the application and flags any constraint in the quote — not after.
• Typical export cap ~5 kW — single-phase residential export in Adelaide is typically around 5 kW on the SA Power Networks network. A battery softens the cap — solar that can't export charges the FranklinWH instead of being curtailed.
• 5–15 business days — typical connection-approval turnaround once the installer lodges with SA Power Networks.

Ready for FranklinWH quotes in Adelaide?

Request quotes from up to 3 vetted installers for a FranklinWH in Adelaide — postcode in, quotes out.

Get my FranklinWH quotes for Adelaide

Areas served around Adelaide

Matching covers Greater Adelaide, not just the centre — enquiries route on your postcode. Local solar detail for each suburb:

• Halifax Street (5000) · 0.4 km from Adelaide — 1,365 systems, 18,348 kW installed
• Hutt Street (5000) · 0.8 km from Adelaide
• Sturt Street (5000) · 0.9 km from Adelaide
• Rundle Mall (5000) · 1.1 km from Adelaide
• Station Arcade (5000) · 1.3 km from Adelaide
• Adelaide (5001) · 1.4 km from Adelaide — 13 systems, 239 kW installed
• Adelaide University (5005) · 1.4 km from Adelaide
• Parliament House (5000) · 1.4 km from Adelaide
• The University Of Adelaide (5005) · 1.4 km from Adelaide
• University Of Adelaide (5005) · 1.4 km from Adelaide
• Parkside (5063) · 1.5 km from Adelaide — 2,443 systems, 17,924 kW installed
• City West Campus (5000) · 1.6 km from Adelaide
• Wayville (5034) · 1.7 km from Adelaide — 2,249 systems, 16,141 kW installed
• Eastwood (5063) · 1.9 km from Adelaide
• Unley (5061) · 1.9 km from Adelaide — 2,267 systems, 18,442 kW installed
• Kent Town (5067) · 2.0 km from Adelaide — 1,978 systems, 16,425 kW installed
• Kent Town (5071) · 2.0 km from Adelaide — 3 systems, 14 kW installed
• Hackney (5069) · 2.1 km from Adelaide — 1,941 systems, 15,118 kW installed
• Keswick Terminal (5035) · 2.2 km from Adelaide — 1,190 systems, 8,788 kW installed
• Rose Park (5067) · 2.2 km from Adelaide
• Goodwood (5034) · 2.3 km from Adelaide
• Dulwich (5065) · 2.4 km from Adelaide — 2,335 systems, 16,803 kW installed
• Hyde Park (5061) · 2.5 km from Adelaide
• Keswick (5035) · 2.7 km from Adelaide
• North Adelaide (5006) · 2.7 km from Adelaide — 940 systems, 7,123 kW installed
• College Park (5069) · 2.8 km from Adelaide
• North Adelaide Melbourne St (5006) · 2.8 km from Adelaide
• Forestville (5035) · 2.9 km from Adelaide
• Frewville (5063) · 2.9 km from Adelaide
• Malvern (5061) · 2.9 km from Adelaide
• Millswood (5034) · 2.9 km from Adelaide
• Norwood (5067) · 2.9 km from Adelaide
• Norwood South (5067) · 2.9 km from Adelaide
• Mile End South (5031) · 3.0 km from Adelaide — 2,045 systems, 18,107 kW installed
• Fullarton (5063) · 3.1 km from Adelaide
• Glenside (5065) · 3.1 km from Adelaide
• Hilton (5033) · 3.1 km from Adelaide — 1,663 systems, 12,808 kW installed
• Toorak Gardens (5065) · 3.1 km from Adelaide
• Unley Park (5061) · 3.2 km from Adelaide
• Ashford (5035) · 3.3 km from Adelaide
• Stepney (5069) · 3.3 km from Adelaide
• Bowden (5007) · 3.9 km from Adelaide — 1,583 systems, 13,589 kW installed
• Marleston (5033) · 4.0 km from Adelaide
• Seaton North (5023) · 9.9 km from Adelaide — 3,522 systems, 21,832 kW installed
• Hove (5048) · 11.3 km from Adelaide — 3,890 systems, 23,610 kW installed
• West Lakes Shore (5020) · 13.2 km from Adelaide — 846 systems, 5,051 kW installed
• Marino (5049) · 15.3 km from Adelaide — 2,858 systems, 17,146 kW installed
• Woodcroft (5162) · 21.3 km from Adelaide — 9,417 systems, 49,309 kW installed

Read before you commit

• FranklinWH aPower review

FranklinWH questions, Adelaide answers

What actually makes FranklinWH different from other batteries in Adelaide?

The aGate. Most battery systems manage the battery; the aGate manages the house — solar, grid, storage, generator and EV charging as one orchestrated system, with individual circuits controllable from the app. The battery itself is deliberately conventional. If that whole-home layer is not something you value, you are paying for capability you will not use — which is the fair way to decide on this brand.

Will FranklinWH work with the solar system I already have for an Adelaide home?

Yes — this is one of its cleanest strengths. The aPower is AC-coupled and inverter-agnostic, so it sits alongside whatever solar brand you run today without touching it. Your solar keeps doing its job; the FranklinWH layer manages where the energy goes. The one caveat: if your existing inverter is near end of life, replacing it is a separate future job this system does not solve.

Is a FranklinWH battery eligible for the federal rebate in Adelaide, SA?

Eligibility is model-by-model on the Clean Energy Council approved list, so have the installer show you the exact aPower variant on the current list before signing. With a high-end system the rebate is a large number — worth thirty seconds of checking.

How well does FranklinWH handle blackouts if I live in Adelaide?

This is the strongest part of the product. It switches over automatically, can start itself from stored energy with the grid down, and with solar attached can run the managed circuits indefinitely — genuine off-grid capability rather than a few hours of ride-through. The design decision that matters is which circuits the aGate manages: that list, agreed at quote time, is exactly what stays alive.

Can FranklinWH really run a generator and the battery together for Adelaide households?

Yes, and more gracefully than most: the aGate treats a generator as one more energy source to orchestrate, bringing it in automatically under rules you set rather than requiring manual changeover. For rural properties with existing generators this is one of the most practical reasons to shortlist the brand. It still needs configuring properly at install — ask specifically how the generator handover is set up.

Is one aPower unit enough for my home across Greater Adelaide?

For most grid-connected homes, one unit covers an evening comfortably; whether it covers your ambitions depends on what you want the system to do in an outage. Whole-home resilience — the thing FranklinWH is actually built for — often points to two units or more once you add up the circuits you refuse to lose. Do the load maths before deciding, because the aGate architecture makes adding units later straightforward but never free.

In Adelaide, is FranklinWH too new in Australia to trust?

It arrived in 2023, so the local record is real but short — a few years of installs, a local office, and customer scores at the top of the aggregates. That is a genuinely good early signal, not a long one. The sensible hedge is the same as with any newer brand: an installer who has commissioned several of them and will support the system personally, and clarity in writing about who handles a manufacturer claim.

Who installs FranklinWH batteries in Adelaide?

Solar Select is a matching platform for homeowners seeking FranklinWH battery installation in Greater Adelaide. Submit your postcode and requirements to request a match with up to 3 approved installers, subject to current coverage and eligibility. Manufacturer accreditation is verified separately; ask for the credentials relevant to your chosen battery. Free for homeowners.

How do I compare FranklinWH quotes in Adelaide?

Installed prices move constantly and vary by site, so compare on after-rebate dollars per usable kWh rather than headline totals — and only once the scope matches. For this brand the variables that matter are: how many aPower units, and whether the aGate configuration leaves room to add more later; which circuits the aGate controls individually — per-circuit management is the product, so a quote that skips this detail skips the point; whether the design brings in a generator or EV charging now or leaves provision for later. Get all three quotes on the same scope, then compare the installers harder than the numbers.

What battery rebates apply in Adelaide?

The federal Cheaper Home Batteries Program applies nationwide — roughly a quarter off installed cost, upfront, paid at its full rate on the first tier of usable capacity and tapering above that. Because FranklinWH is 13.6 kWh per unit, stackable, how much you collect depends on how the configuration lines up with those tiers, so ask the installer to show the tier split rather than one flat "government incentive" line. SA runs federal-only on batteries in 2026.

What does SA Power Networks need to approve for a FranklinWH in Adelaide?

The connection application covers the whole system, so what gets scrutinised depends on the configuration: the aGate rewires how the home’s circuits are managed — this is switchboard-level work where installer quality shows up immediately. Export in Adelaide is typically around 5 kW single-phase, and approval usually runs 5–15 business days once lodged.

Are your Adelaide installers FranklinWH-accredited?

Accreditation is one of the things we look at, and where a FranklinWH-accredited installer covers Greater Adelaide you'll see that in the match. It is deliberately not the only filter — a current accreditation badge says the installer has done the brand's training, not that they wire a good switchboard or come back in year three. Every installer serving Adelaide is vetted on the same bar set out above before they join. Ask the ones you're matched with what FranklinWH work they've actually done, and how much of it, before you sign.

Is a FranklinWH battery worth it in Adelaide?

Adelaide averages 4.7 peak sun hours, so a 10 kW rooftop array generates roughly 39.9 kWh on an average day — enough to cycle a FranklinWH on most days of the year. With South Australia feed-in tariffs typically paying 4–12c/kWh while grid power costs 30–35c, every stored kWh you use yourself is worth several times what exporting it earns.

How many solar installations are recorded across Greater Adelaide?

Solar Select's Adelaide study-area aggregation of Clean Energy Regulator data includes 348,895 small-scale systems across 154 postcodes — about 2,300 MW as at 2026-06. These are system counts, not a count of unique homes or FranklinWH installers. For a retrofit, check your existing inverter, switchboard and actual generation before choosing storage; the study-area total cannot establish those details.

Answered what you needed?

Get your up to 3 vetted FranklinWH quotes for Adelaide — free, no obligation.

Get my FranklinWH quotes for Adelaide