Sydney, NSW

iStore battery installers across Greater Sydney, NSW.

Get matched with top solar companies in Sydney

  • Add compatible iStore battery modules as your household's energy needs grow
  • Unlock up to $7,000 in federal solar + battery rebates*
  • Compare quotes from vetted installers, with iStore experience where available

iStore

What could an iStore battery save your home?

iStore stacked battery unit

Do you already have solar panels?

Free estimate first. No contact details needed.

*For eligible combined solar and battery installations before January 2027. Battery-only rebates vary with usable capacity. Your installer confirms eligibility and amount.

✓ Up to 3 vetted installers

✓ Free to compare, no obligation

✓ Your chosen battery, your quote request

iStore battery stack, front view
Image: iStore

Meet iStore One Australian brand for your battery, inverter, hot water and EV charger.

  • Grow from 5 to 60 kWh

    Start at 5 kWh and add compatible modules as your needs change, up to 60 kWh, without replacing the battery.

    Each stack takes up to three 5 kWh modules, so bigger systems use more than one stack.

  • Quiet, with no cooling fan

    Natural cooling with no fan keeps noise under 29 dB, so it hums along quietly in the background.

  • Installers' third pick

    In SolarQuotes' 2026 survey, 11% of installers chose iStore for their own home, ranking it third.

The company behind it

iStore is an Australian home-energy brand selling batteries, inverters, heat pump hot water and EV chargers.

  • Australian, family-run

    iStore says it is an Australian-owned, family-run company.

  • 25+ years' experience

    iStore says it has over 25 years of experience in the solar and water heating industries.

  • Began with heat pumps

    iStore says its business started with a single product: its heat pump.

Want an iStore battery on your Sydney home?

Get my iStore quotes

Compare up to 3 vetted installers. Free, no obligation.

An iStore in Sydney performs exactly as well as its configuration — and the configuration is decided by whoever installs it.

Why the installer matters more than the battery

The Clean Energy Regulator inspected 1,278 home battery installations under the Cheaper Home Batteries Program between July 2025 and April 2026 — more than 60% came back substandard and 1.2% unsafe. Solar Select checks installer approval and current eligibility before matching your Sydney enquiry. Manufacturer accreditation is a separate check; confirm the credentials relevant to your chosen battery.

What specifically goes wrong on an iStore install

  • Regional familiarity is the real risk: an installer who rarely fits iStore is learning on your roof, and the brand’s footprint varies by state
  • Battery and inverter pairing must be confirmed against exact model numbers within iStore’s own range
  • Bundled ecosystem quotes need each component justified separately — a strong battery does not automatically make the bundled extras the right pick
  • Clean Energy Council listing is model-by-model — the wrong variant forfeits the federal rebate

Request my iStore quotes in Sydney.

Source: CER inspections, reported by UTS (Apr 2026)

That's why iStore quotes in Sydney are only comparable when the scope matches. Here's what to hold constant.

Comparing iStore quotes in Sydney

We don't publish price bands, because installed prices move constantly and depend on your roof, switchboard and supply. What we can tell you is what to hold constant so three quotes are actually comparable — match these first, then compare after-rebate dollars per usable kWh.

  1. Module count and the expansion ceiling of the quoted configuration
  2. Which iStore hybrid inverter is included, and that the pairing is a validated combination
  3. Whether hot water or EV charging is being bundled, and whether each piece stands on its own merits rather than riding the bundle
  4. Single-phase or three-phase, and circuit-level backup scope
  5. Confirmation the exact battery model is on the Clean Energy Council approved list

A cheaper quote that skips backup hardware, assumes an inverter you don't have, or quietly changes the configuration isn't cheaper — it's a different job.

Want three iStore quotes you can actually compare? Your enquiry goes to up to 3 vetted installers in Sydney, all quoting the same scope.

Who installs iStore batteries in Sydney?

Solar Select is a matching platform for homeowners looking for iStore battery installation in Sydney. Submit your postcode and system requirements to request a match with up to 3 suitable installers, subject to current coverage, availability and brand suitability.

Enter your postcode and we check which vetted installers cover Sydney for iStore.

How are iStore installers matched in Sydney?

Matching considers approved installer accounts, active campaign geography, the requested system and current eligibility. Verified brand accreditations are prioritised when relevant. The actual match happens after you submit your postcode and enquiry; displayed companies are not a promise of who will receive it.

Compare recent independent reviews, business history, workmanship terms and the accreditation relevant to your chosen battery. Manufacturer accreditation and general installer approval are separate checks.

Check my iStore options in Sydney

Battery rebates in New South Wales

  • Cheaper Home Batteries Program (federal) — roughly a quarter off the installed battery cost, upfront, paid at its full rate on the first tier of usable capacity and at a reduced rate above that. Applied at quote by the installer, not claimed back later.
  • NSW VPP Incentive (Peak Demand Reduction Scheme) (NSW) — NSW adds a VPP top-up of roughly $550–$1,500 for connecting the battery to an approved Virtual Power Plant. It stacks with the federal rebate, but it is VPP-conditional — if you don’t want a third-party operator dispatching your battery during peak events, you lose it. Full NSW rebate breakdown

Still weighing an iStore up? The Sydney numbers and the deeper reading are below.

iStore battery installation in Sydney, NSW

Comparing iStore for a home in Greater Sydney? Use your property's postcode and existing solar details when requesting quotes. This page focuses on Greater Sydney, NSW.

  • 459,610 small-scale solar installations across 229 postcodes assigned to the Sydney study area.
  • 11.1 kW median of residential-plausible postcode average system sizes in 2025.

Clean Energy Regulator postcode data · as at 2026-06. Solar Select aggregation of CER data for postcodes containing mapped suburbs nearest to Sydney within 45 km. This study area is not an official city boundary; postcodes can cross its edges. These figures do not measure installer availability.

The Sydney numbers

Solar Select's Sydney study-area aggregation of Clean Energy Regulator data includes 459,610 small-scale systems across 229 postcodes — about 3,573 MW of capacity as at 2026-06. For an iStore retrofit in Sydney, check the existing inverter and switchboard before choosing the configuration. Ask whether the inverter stays, is replaced, or works alongside another one; installation counts do not answer that for your home.

In the typical Greater Sydney postcode, new systems averaged about 11.1 kW through 2025. That is the scale of array an iStore battery would be charged from here, so ask each installer to size storage against that generation rather than the headline capacity: the configuration that suits a 11.1 kW roof is not automatically the biggest one quoted.

Greater Sydney splits across three networks — Ausgrid through the city, east and north, Endeavour Energy from Parramatta out through Blacktown and the south-west, and Essential Energy on the rural fringe. Which one your address sits on sets the export limit and the approval timeline before any hardware is chosen, so ask each installer to name the network their iStore quote assumes.

Sydney swings from about 6.5 peak sun hours in Jan to 2.6 in Jun — roughly 2.5× more generation in the sunniest month than the dullest. On a 10 kW array that is around 55.3 kWh a day in Jan against 22.1 kWh in Jun. Size an iStore on the winter figure: iStore is 5–60 kWh modular, so the real question at quote stage is what it can actually refill on a 22.1 kWh day, not what it holds on paper.

Show month-by-month generation
Month-by-month generation for a 10 kW array in Sydney
MonthPeak sun hours10 kW array, kWh/day
Jan6.555.3 kWh
Feb5.647.6 kWh
Mar4.739.9 kWh
Apr3.731.5 kWh
May2.924.7 kWh
Jun2.622.1 kWh
Jul2.823.8 kWh
Aug3.731.5 kWh
Sep4.739.9 kWh
Oct5.546.8 kWh
Nov6.151.9 kWh
Dec6.555.3 kWh

Monthly shape from Bureau of Meteorology climatology for New South Wales, scaled to Sydney's annual average of 4.6 peak sun hours; 85% system derate.

Install counts and capacity: Clean Energy Regulator postcode data for small-scale installations (CC BY).

What owning an iStore is actually like

Spec sheets stop being interesting about a week after install. These are the things owners notice in year one.

  • The ecosystem is the practical difference day to day — hot water heating on solar through the same brand’s kit is load-shifting that shows up on real bills.
  • Local-brand accountability means the support chain ends in Australia rather than at an importer — ask who answers the phone anyway, because the answer varies by region.
  • Monitoring covers the essentials competently; owners running the full ecosystem get the most from it.
  • Familiarity among installers is regionally uneven — deepest where the brand’s distribution is strongest, thinner elsewhere, and the outcome tracks that familiarity.

Four questions to ask any iStore quote

  1. Can you show me this exact battery model on the Clean Energy Council approved list?
  2. How many iStore systems have you commissioned, and is iStore’s support strong in this region?
  3. Which exact inverter pairs with this battery, and is that a validated combination?
  4. If hot water or EV charging is bundled, what does each piece cost and earn on its own?
Is iStore right for your home? Fit and warranty checks

A good fit in Sydney if…

  • Households electrifying broadly — storage, hot water, EV — who want one brand and one support chain across the lot
  • Buyers who specifically want an Australian brand with local distribution behind the badge
  • Value-focused homes where modular sizing from small to very large matters
  • Customers of installers who carry iStore’s range and support it directly

Consider the limitations

  • You want the deepest possible national installer network wherever you live
  • You are retrofitting onto an existing non-iStore inverter you want to keep
  • Virtual-power-plant participation is central to your plan — verify program acceptance per model before counting on it
  • You want a global-scale manufacturer’s volume behind the hardware rather than a local brand’s curation of it

Grid connection in Sydney

  • Distributor pre-approval — battery systems usually need explicit pre-approval from your distributor: across Greater Sydney that is Ausgrid, Endeavour Energy or Essential Energy, depending on the address. A good installer lodges the application and flags any constraint in the quote — not after.
  • Typical export cap ~5 kW — single-phase residential export across Greater Sydney is typically around 5 kW, though the exact cap depends on which network your address is on. A battery softens the cap — solar that can't export charges the iStore instead of being curtailed.
  • 5–15 business days — typical connection-approval turnaround once the installer lodges with your distributor.

Ready for iStore quotes in Sydney?

Request quotes from up to 3 vetted installers for an iStore in Sydney — postcode in, quotes out.

Get my iStore quotes for Sydney

Areas served around Sydney

Matching covers Greater Sydney, not just the centre — enquiries route on your postcode. Local solar detail for each suburb:

  • Sydney South (2000) · 0.0 km from Sydney — 83 systems, 2,438 kW installed
  • Sydney (2001) · 0.3 km from Sydney
  • Sydney Gateway Facility (2891) · 0.3 km from Sydney
  • Darling Harbour (2000) · 0.7 km from Sydney
  • World Square (2002) · 0.7 km from Sydney
  • Barangaroo (2000) · 0.9 km from Sydney
  • Parliament House (2000) · 1.1 km from Sydney
  • Darling Island (2009) · 1.2 km from Sydney — 36 systems, 839 kW installed
  • Haymarket (2000) · 1.2 km from Sydney
  • Millers Point (2000) · 1.2 km from Sydney
  • Pyrmont (2009) · 1.2 km from Sydney
  • The Rocks (2000) · 1.2 km from Sydney
  • Darlinghurst (2010) · 1.4 km from Sydney — 329 systems, 2,724 kW installed
  • Taylor Square (2010) · 1.4 km from Sydney
  • Woolloomooloo (2011) · 1.4 km from Sydney — 74 systems, 1,223 kW installed
  • Kings Cross (2011) · 1.6 km from Sydney
  • Potts Point (2011) · 1.6 km from Sydney
  • Ultimo (2007) · 1.6 km from Sydney — 42 systems, 699 kW installed
  • Broadway (2007) · 1.7 km from Sydney
  • Dawes Point (2000) · 1.7 km from Sydney
  • Surry Hills (2010) · 1.7 km from Sydney
  • Hmas Kuttabul (2011) · 1.8 km from Sydney
  • Chippendale (2008) · 1.9 km from Sydney — 134 systems, 1,289 kW installed
  • Elizabeth Bay (2011) · 1.9 km from Sydney
  • Strawberry Hills (2012) · 1.9 km from Sydney
  • Strawberry Hills (2013) · 1.9 km from Sydney
  • Hmas Rushcutters (2027) · 2.0 km from Sydney — 151 systems, 1,337 kW installed
  • Rushcutters Bay (2011) · 2.0 km from Sydney
  • Glebe (2037) · 2.1 km from Sydney — 540 systems, 3,641 kW installed
  • Balmain East (2041) · 2.1 km from Sydney — 898 systems, 5,250 kW installed
  • Darlington (2008) · 2.4 km from Sydney
  • Paddington (2021) · 2.4 km from Sydney — 418 systems, 3,277 kW installed
  • Redfern (2016) · 2.4 km from Sydney — 244 systems, 1,910 kW installed
  • Kirribilli (2061) · 2.6 km from Sydney — 53 systems, 446 kW installed
  • Milsons Point (2061) · 2.6 km from Sydney
  • The University Of Sydney (2006) · 2.7 km from Sydney
  • Darling Point (2027) · 2.8 km from Sydney
  • Edgecliff (2027) · 2.8 km from Sydney
  • Forest Lodge (2037) · 2.8 km from Sydney
  • Balmain (2041) · 2.9 km from Sydney
  • McMahons Point (2060) · 2.9 km from Sydney — 365 systems, 3,601 kW installed
  • Camperdown (2050) · 3.5 km from Sydney — 241 systems, 2,356 kW installed
  • North Sydney (2059) · 3.5 km from Sydney — 3 systems, 43 kW installed
  • Waverton (2060) · 3.6 km from Sydney
  • Beaconsfield (2015) · 4.5 km from Sydney — 505 systems, 9,639 kW installed
  • Clovelly West (2031) · 6.3 km from Sydney — 1,386 systems, 10,293 kW installed
  • Hunters Hill (2110) · 7.2 km from Sydney — 844 systems, 6,981 kW installed
  • Castlecrag (2068) · 7.8 km from Sydney — 1,781 systems, 13,616 kW installed

Read before you commit

iStore questions, Sydney answers

In Sydney, who is iStore — is it really an Australian brand?

iStore is an Australian energy brand selling batteries, hybrid inverters, heat pump hot water, EV chargers and pool heating through local distribution. Like most local brands it curates and engineers its range rather than fabricating every cell itself — what you are buying is the Australian accountability layer: local distribution, local support, one brand across the electric home. Ask who handles support in your region, because depth varies by state.

Is an iStore battery eligible for the federal rebate for a Sydney home?

Model-by-model on the Clean Energy Council approved list, as with every brand. With a modular range the specific configuration matters, so have the installer show you the exact quoted model on the current list before you sign anything.

How big can an iStore battery system get in Sydney, NSW?

The modular range runs from 5 kWh to 60 kWh, which covers everything from a small starter battery to genuinely large storage for big or off-peak-hungry households. The usual modular caveat applies: the ceiling that matters is the one your quoted configuration was designed for, so confirm what adding modules later actually involves.

Is bundling hot water and EV charging with the battery a good idea if I live in Sydney?

The engineering logic is sound — a heat pump running on midday solar shifts a big recurring load onto power you have already paid for, and one brand across the pieces simplifies support. The commercial logic needs checking piece by piece: each component should stand on its own merits and price, not ride the bundle. A good installer will happily quote the pieces separately so you can see.

Can I add an iStore battery to solar I already own for Sydney households?

iStore batteries pair with iStore’s own hybrid inverters, so the natural path is the system taking over the inverter role rather than bolting onto another brand’s hardware. On ageing solar that can be a sensible generational refresh; on a recent inverter it means replacing something that works. Ask the installer to justify the design against an AC-coupled alternative that would leave your inverter alone.

What happens to an iStore system in a blackout across Greater Sydney?

Backup-capable configurations hold up the circuits wired to the backup side automatically, and the modular capacity determines how long they run. As with any hybrid system the scope is set at design time — which circuits, which phase, what happens as the modules run down — so have the quote spell out the blackout behaviour rather than accepting a general assurance that the battery has backup.

In Sydney, is a smaller Australian brand riskier than a global one?

It is a different risk, not automatically a bigger one. Global scale means volume-tested hardware but support that can end at an importer; a local brand means the accountability sits here but on a smaller organisation. The practical questions are the same either way: how long has the support chain existed, who answers in year four, and how experienced is the installer with this exact product. Weight those over the size of the logo.

Who installs iStore batteries in Sydney?

Solar Select is a matching platform for homeowners seeking iStore battery installation in Greater Sydney. Submit your postcode and requirements to request a match with up to 3 approved installers, subject to current coverage and eligibility. Manufacturer accreditation is verified separately; ask for the credentials relevant to your chosen battery. Free for homeowners.

How do I compare iStore quotes in Sydney?

Installed prices move constantly and vary by site, so compare on after-rebate dollars per usable kWh rather than headline totals — and only once the scope matches. For this brand the variables that matter are: module count and the expansion ceiling of the quoted configuration; which iStore hybrid inverter is included, and that the pairing is a validated combination; whether hot water or EV charging is being bundled, and whether each piece stands on its own merits rather than riding the bundle. Get all three quotes on the same scope, then compare the installers harder than the numbers.

What battery rebates apply in Sydney?

The federal Cheaper Home Batteries Program applies nationwide — roughly a quarter off installed cost, upfront, paid at its full rate on the first tier of usable capacity and tapering above that. Because iStore is 5–60 kWh modular, how much you collect depends on how the configuration lines up with those tiers, so ask the installer to show the tier split rather than one flat "government incentive" line. NSW then adds NSW VPP Incentive (Peak Demand Reduction Scheme) on top.

Which distributor approves an iStore connection in Sydney?

Across Greater Sydney the poles-and-wires network is Ausgrid, Endeavour Energy or Essential Energy, depending on the address — your installer identifies which one at quote stage and lodges with them. The application covers the whole system, so what gets scrutinised depends on the configuration: regional familiarity is the real risk: an installer who rarely fits iStore is learning on your roof, and the brand’s footprint varies by state. Export is typically around 5 kW single-phase, though the exact cap depends on your network, and approval usually runs 5–15 business days once lodged.

Are your Sydney installers iStore-accredited?

Accreditation is one of the things we look at, and where an iStore-accredited installer covers Greater Sydney you'll see that in the match. It is deliberately not the only filter — a current accreditation badge says the installer has done the brand's training, not that they wire a good switchboard or come back in year three. Every installer serving Sydney is vetted on the same bar set out above before they join. Ask the ones you're matched with what iStore work they've actually done, and how much of it, before you sign.

Is an iStore battery worth it in Sydney?

Sydney averages 4.6 peak sun hours, so a 10 kW rooftop array generates roughly 39.1 kWh on an average day — enough to cycle an iStore on most days of the year. With New South Wales feed-in tariffs typically paying 5–12c/kWh while grid power costs 30–35c, every stored kWh you use yourself is worth several times what exporting it earns.

How many solar installations are recorded across Greater Sydney?

Solar Select's Sydney study-area aggregation of Clean Energy Regulator data includes 459,610 small-scale systems across 229 postcodes — about 3,573 MW as at 2026-06. These are system counts, not a count of unique homes or iStore installers. For a retrofit, check your existing inverter, switchboard and actual generation before choosing storage; the study-area total cannot establish those details.

Answered what you needed?

Get your up to 3 vetted iStore quotes for Sydney — free, no obligation.

Get my iStore quotes for Sydney

Local data reviewed by the Solar Select team. Installer network information is shown separately above when verified records are available. Sydney data sourced from BOM (sun hours), CER (rebates) and AER (Ausgrid network — export figures are indicative; your distributor sets the limit for your address). iStore product and pricing figures are sourced below. Last verified 2026-08-15. Page updated 6 October 2026.

All New South Wales locations · All iStore locations · How it works