Sungrow SBR
Smaller stackable modules
High-voltage DC-coupled LFP stack — the volume seller for typical homes.
Australia-wide
Sungrow battery installers in Australia
Get matched with top solar companies in Australia
- Sungrow's stackable batteries offer different storage sizes for smaller and larger homes
- Unlock up to $7,000 in federal solar + battery rebates*
- Compare quotes from vetted installers, with Sungrow experience where available
Sungrow
What could a Sungrow battery save your home?
*For eligible combined solar and battery installations before January 2027. Battery-only rebates vary with usable capacity. Your installer confirms eligibility and amount.
✓ Up to 3 vetted installers
✓ Free to compare, no obligation
✓ Your chosen battery, your quote request
Meet Sungrow Battery modules that stack into a tower, matched to Sungrow's own hybrid inverters.
- Modules plug in, no cables
SBR modules plug and play with no cables needed between them, and Sungrow says one person can install them.
- Fine steps for typical homes
SBR builds in 3.2 kWh modules, two to eight per stack, from 6.4 up to 25.6 kWh, and can be extended later.
Ask how many more modules your quoted stack can take later.
- Installers' second pick
21% of installers in SolarQuotes' 2026 survey picked Sungrow for their own home, putting it second.
- 10 years, 70% capacity promised
For batteries installed from October 2024, Sungrow promises 70% capacity at ten years, with unlimited cycles for home use and backup.
Sungrow's warranty requires the battery to run between -20 °C and 50 °C. Sungrow's warranty document names SBH200 to SBH400; if your quote is an SBH100 or SBH150, ask for its warranty terms in writing.
The company behind it
A Chinese inverter and battery maker based in Hefei, founded in 1997.
Founded 1997
Sungrow says it was established in 1997 and marks 2003 as the year of its first grid-connected inverter.
Shenzhen-listed
Sungrow says it has been listed on the Shenzhen Stock Exchange since 2011.
North Sydney office
Sungrow Australia Group runs a North Sydney office with a 1800 hotline.
Want a Sungrow battery on your home?
Get my Sungrow quotesCompare up to 3 vetted installers. Free, no obligation.
We pick them, nobody bids
Request a match with up to 3 approved installers. Current availability, campaign geography and brand suitability are checked for your enquiry.
Check the installation credentials
Ask each installer for their workmanship warranty, trading history and current brand credentials before you decide.
Rebates at quote
The federal Cheaper Home Batteries discount — roughly a quarter off installed cost — plus your state layer, applied upfront at quote.
Find Sungrow installers near you.
Each state page lists its capital and regional centres, the battery rebate stack for that state, and the installers we match you with there. Not listed? Matching runs on postcode, so enter yours anyway.
- New South Wales — 13 locations
- Victoria — 8 locations
- Queensland — 11 locations
- Western Australia — 3 locations
- South Australia — 1 location
- Tasmania — 2 locations
- Northern Territory — 2 locations
- Australian Capital Territory — 1 location
Is Sungrow right for your home? Fit and warranty checks
A good fit if…
- Buyers who want strong cost per kWh from a brand with real Australian support depth
- Three-phase homes — the SH-T inverter with an SBH stack gives genuine three-phase capability
- Larger stacks where cost per kWh dominates the decision
- Households buying inverter and battery together as one new system
- Anyone who values a dense installer base and easy parts availability
Consider the limitations
- You are retrofitting onto an existing non-Sungrow inverter — you would have to replace it, which removes the price advantage
- You live somewhere consistently very hot; read the warranty conditions with your installer before committing
- You want freedom to change inverter brand later
- You want a single all-in-one box rather than a battery plus separate inverter
The Sungrow range
Sungrow SBH
Larger modules, higher continuous power, parallel stacks
Newer family for larger and three-phase homes.
Sungrow SH hybrid inverter (required)
SH-RS single-phase / SH-T three-phase
The batteries only work with these. Sungrow’s own SG string inverters will not do, and neither will another brand.
Sungrow specifications and source documents
Sungrow sells two modular high-voltage LFP battery families in Australia: SBR, built from smaller modules for typical homes, and the newer SBH, built from larger modules with more continuous power for bigger and three-phase homes. Both are DC-coupled and both pair only with Sungrow’s own SH-series hybrid inverters. It is the benchmark most other batteries get priced against, and installers reach for it because parts and support are easy to get — but the closed pairing is a real constraint if you already own an inverter you like.
Sungrow questions, answered
- Can I add a Sungrow battery to my existing inverter?
- Only if it is a Sungrow SH-series hybrid. The SBR and SBH batteries are DC-coupled and work exclusively with those — not with Sungrow’s own SG string inverters, and not with other brands. Retrofitting onto anything else means replacing the inverter, which is usually enough to change which battery makes sense for you.
- Is Sungrow a good battery for a hot climate?
- It is worth reading the warranty conditions closely first. Independent analysis has flagged site-temperature requirements in the Sungrow performance warranty that would be hard to meet in hot inland and northern parts of Australia. The hardware is well regarded; the question is whether your site keeps the warranty intact. Ask the installer to point you at the specific clause.
- What is the difference between Sungrow SBR and SBH?
- SBR uses smaller modules and is the mainstream choice for most homes. SBH uses larger modules, starts higher, scales further and delivers more continuous power, aimed at larger and three-phase homes. They pair with different inverter configurations, so the choice is made at design stage rather than adjusted later.
- Why do installers recommend Sungrow so often?
- Because it is the safe commercial choice: strong value per kWh, a very dense Australian installer base, easy parts, and a product they have fitted many times. That is a genuine reason to shortlist it. It is not a reason to skip comparing — "what my installer usually fits" and "what suits your house" are different questions, and the closed inverter pairing in particular deserves scrutiny.
- Can I install the Sungrow inverter now and add the battery later?
- Yes, provided the inverter is an SH-series hybrid rather than an SG string inverter. This is the single most valuable thing to get right if storage is a year or two away: the same brand name on the box does not mean the same upgrade path. Tell your installer at solar-quote stage that a battery is coming, and get the model number in writing.
- Will a Sungrow battery run my air conditioning?
- The SBH family in particular is built for higher continuous output, which makes it a reasonable choice for homes running ducted cooling or several large loads at once. SBR suits more typical evening demand. This is exactly the decision that gets made badly when a quote is sized on price rather than load, so ask which family is quoted and why.